WinRAR 6.0.2 简体中文特别版（x86&x64）

Version 5.60

1. We updated WinRAR graphics.

We are grateful to http://weirdsgn.com and http://icondesignlab.com
designers participated in this endeavor and proud to announce that
WinRAR uses the new icon set prepared by Aditya Nugraha Putra
from http://weirdsgn.com.

Previous WinRAR icons are available as interface theme here:
https://rarlab.com/themes/WinRAR_Classic_48x36.theme.rar

2. "Repair" command efficiency is improved for recovery record protected
RAR5 archives. Now it can detect deletions and insertions of unlimited
size also as shuffled data including data taken from several recovery
record protected archives and merged into a single file in arbitrary
order.

3. "Turn PC off when done" archiving option is changed to "When done"
drop down list, so you can turn off, hibernate or sleep your PC
after completing archiving.

4. Use -ioff or -ioff1 command line switch to turn PC off,
-ioff2 to hibernate and -ioff3 to sleep your PC after completing
an operation.

5. If encoding of comment file specified in -z<file> switch is not
defined with -sc switch, RAR attempts to detect UTF-8, UTF-16LE
and UTF-16BE encodings based on the byte order mask and data
validity tests.

6. WinRAR attempts to detect ANSI, OEM and UTF-8 encodings of
ZIP archive comments automatically.

7. "Internal viewer/Use DOS encoding" option in "Settings/Viewer"
is replaced with "Internal viewer/Autodetect encoding".
If "Autodetect encoding" is enabled, the internal viewer attempts
to detect ANSI (Windows), OEM (DOS), UTF-8 and UTF-16 encodings.

8. Normally Windows Explorer context menu contains only extraction
commands if single archive has been right clicked. You can override
this by specifying one or more space separated masks in "Always display
archiving items for" option in Settings/Integration/Context menu items",
so archiving commands are always displayed for these file types
even if file was recognized as archive. If you wish both archiving
and extraction commands present for all archives, place "*" here.

9. SFX module "SetupCode" command accepts an optional integer parameter
allowing to control mapping of setup program and SFX own error codes.
It is also accessible as "Exit code adjustment" option
in "Advanced SFX options/Setup" dialog.

10. New "Show more information" WinRAR command line -im switch.
It can be used with "t" command to issue a message also in case of
successful archive test result. Without this switch "t" command
completes silently if no errors are found.

This switch is applicable only to WinRAR.exe and ignored by console
RAR.exe.

11. If a wrong password is entered when unpacking an encrypted file
in ZIP archive, WinRAR proposes to enter a valid password
for same file again instead of aborting extraction.

12. If a wrong password is entered when opening or unpacking RAR archive
with encrypted file names, WinRAR proposes to enter a valid password
again instead of aborting the operation. Previous versions already
did so for RAR archives with encrypted file data, but aborted
for archives with file name encryption.

13. WinRAR recognizes GZIP files with arbitrary data preceding
an actual GZIP archive, such as .scexe firmware files.

14. @filelist parameter can be specified in "Files to add" field of
archiving dialog. In this case WinRAR will attempt the list of archiving
files from 'filelist' file, which should be the plain text, one file
name per line.

15. Info dialog:

a) compression ratio graph is updated;

b) "Names and data" is displayed in "Encryption" field for
archives with encrypted file names.

16. Full archive name is displayed if mouse pointer is placed over
an archive name in the operation progress window. It can be useful
if archive name is lengthy and does not fit to available window space.

17. If -ts1 switch is used with -u or -f, file time comparison is performed
with 1 second precision. Previosuly in such case we could wrongly treat
an adding file as newer than archived just because we compared the high
precision adding file time against the low precision archived file time.

18. "Update" and "Fresh" commands ('u' and 'f' in the command line mode)
quit immediately if no files are to be updated. Previously they created
a temporary archive before quitting when updating archives with recovery
record or quick open information.

19. Prompt is issued after creating 500 volumes from WinRAR GUI shell,
so user can continue or quit further archiving. It is done to prevent
creating many thousands of volumes in case of wrongly entered
volume size.

20. WinRAR uses megabytes instead of bytes as default units for volume size
field in the archiving dialog.

21. "Repair" command issues "Recovery record is corrupt" message
after repairing RAR5 archive containing a broken recovery record.
Previously such message was issued only by "Test" command
and "Repair" handled most of recovery record damages silently.

22. Bugs fixed:

a) fixed potential security issues when processing corrupt
RAR archives;

b) non-English characters in TAR files with PAX extended headers
were not displayed correctly;

c) "rar x arcname.rar .." command unpacked files to current folder
instead of its parent;

d) pasting files from Windows Explorer to archive opened in WinRAR
blocked further copy and paste operations in Explorer until
archiving was finished;

e) SFX module issued "The specified password is incorrect" message
infinitely not prompting for correct password once a wrong password
was entered;

f) folders time was always set when extracting ZIP archives even if
"File time" options in the extraction dialog were turned off;

g) if "Delete archive: Always" was selected when extracting
and user pressed "Cancel" in the file overwrite or password prompt,
an archive could be deleted even after cancelling extraction
for .zip and .7z formats.

Version 5.50

1. WinRAR and command line RAR use RAR 5.0 archive format by default.
You can change it to RAR 4.x compatible format with "RAR4" option
in archiving dialog or -ma4 command line switch.

If you prefer RAR 4.x format by default, use "Create default..."
button on "Compression" page of WinRAR settings and set "RAR4"
in the displayed dialog.

This change affects only new clean installs. If you already saved
RAR format in the default compression profile in previous versions,
WinRAR respects stored settings.

2. Use "Set master password" button in "Organize passwords" dialog
to encrypt saved password records and protect them from unauthorized
access.

If saved passwords are protected with master password, you need to
enter the master password and press "OK" in password prompt to access
them. If entered password does not match the master password,
it is treated as a usual password for archive operations.

Once entered, the master password is valid until WinRAR is closed.
Close WinRAR and open it again after specifying the master password
if you wish to see how protection works. Enter a valid and then
empty master password to remove encryption from previously protected
password records.

This WinRAR version uses a new data format for password organizer,
so passwords stored in "Organize passwords" dialog are not readable
by older versions. It does not affect archive encryption formats
and encrypted archives are compatible with previous WinRAR version.
Organizer data is converted to a new format only when you save it
and not immediately after installing WinRAR.

3. Prompt proposing to set the master password is displayed
when storing a password in compression profile. You can enter
the master password to encrypt password data stored in Registry
and protect it from unauthorized access. You will need to enter
the master password in password prompt dialog to access
such compression profile after that.

Once entered, the master password is valid until WinRAR is closed.
Close WinRAR and open it again after specifying the master password
if you wish to see how protection works.

4. By default, WinRAR uses AES-256 in CTR mode to encrypt ZIP archives.
While AES-256 is significantly more secure than ZIP 2.0 legacy
encryption algorithm, it can be incompatible with some older
unzip software. If compatibility with such tools is required,
you can enable "ZIP legacy encryption" option in the password
dialog or use -mezl switch in the command line mode.

5. Added extraction support for .LZ archives created by Lzip compressor.

6. Modern TAR tools can store high precision file times, lengthy
file names and large file sizes in special PAX extended headers
inside of TAR archive. Now WinRAR supports such PAX headers
and uses them when extracting TAR archives.

7. New "Store modification time" option on "Time" page of archiving
dialog can be used to prohibit storing the file modification time
in RAR 5.x archives. Former "High precision modification time"
option is replaced by "High precision time format".

8. New "Full paths in title bar" option in "Settings/General" dialog.
If enabled, the full path of currently opened folder or archive
is displayed in WinRAR title bar.

9. New "File types to open as archives first" option
in "Settings/Compression". Here you can define how Enter
or double click on a file with non-archive extension and archive
contents should be processed in WinRAR file list in file
management mode. Examples of such files are .docx or self-extracting
.exe archives. You can instruct WinRAR either to open such files
as archives first or to execute or open them in associated programs.

Default settings are to open self-extracting exe and to run
other types of archives with non-archive extension.

Regardless of these options, you can always open any such
archive file by pressing Ctrl+PgDn on its name in WinRAR file list.

Default folders for archives and extracted files are moved
from "Settings/Compression" to "Settings/Paths".

10. New "Copy full names to clipboard" command in "File" menu
places full names of selected files to clipboard.

11. Changes in the context menu displayed when right clicking
the file list in WinRAR:

a) several commands, which are also present on the toolbar
or in main menu, such as "View" and "Repair", are removed
from this context menu;

b) "Copy full names to clipboard" command is added;

c) "Run" for executables, "Open in associated application"
for associated files and "Show archive contents" for archives
are added. They allow to choose a way to process SFX archives
and archive files with non-archive extensions.

These items are present only in the file management mode
and are not available inside of archives.

12. LZ and ZIPX are added to list of associations in Settings/Integration
dialog.

13. LZ and ZIPX extensions are added to default list of formats for
-ms switch ("Specify file types to store") invoked without parameters.

14. You can specify 'f' charset value in -sc switch to use UTF-8
encoding. For example:

rar a -scfl arcname @filelist.txt

to read contents of filelist.txt as UTF-8 text.

15. RAR "lt" and "vt" commands display file times with nanosecond
precision. Such precision is used in RAR5 archives created
by RAR/Unix 5.50 and newer. Archives created by WinRAR have 100ns
file time precision.

16. Only '+', '-' and '1' precision modifiers are supported
in -ts switch now. Use '+' to store the file time with maximum
precision, '-' to omit the file time and '1' to store it with
1 second precision. Intermediate precision modes previously
defined with '2' and '3' modifiers are not available in RAR 5.0
archive format and ignored by -ts switch.

17. If a wrong password is entered when unpacking an encrypted file
in RAR5 archive, WinRAR proposes to enter a valid password
for same file again instead of aborting extraction.

18. File path information is displayed if mouse pointer is placed over
a name of archiving file in the operation progress window.

19. Name of currently active compression profile is displayed
in the archiving dialog above "Profiles..." button.

20. If "Find" command is invoked from inside of archive subfolder,
"File names to find" will include the path to this subfolder.
So "Find" will search only starting from this subfolder.

21. Bugs fixed:

a) fixed crashes and security vulnerability when unpacking corrupt
RAR archives;

b) WinRAR failed to unpack files in ZIP archives compressed
with XZ algorithm and encrypted with AES;

c) if "Windows progress bars" option in WinRAR settings was turned off
and "Put each file to separate archive" archiving mode was used,
"gold" part of total progress bar did not display the compressed
data ratio correctly;

d) SFX archive extraction progress was incorrect in case of
multivolume SFX archive with total volume size exceeding 4 GB;

e) if archived folder name included trailing spaces, if user
selected and extracted some folders in non-root archive folder
and if "Allow potentially incompatible names" extraction option
was turned off, WinRAR could lose one or more leading characters
in extracted folder name;

f) if only creation or only last access file time was stored in RAR5
archive with 1 second precision, such as with -ma5 -tsm- -tsa1
switches, this stored time was ignored when extracting.